1300 001 752

Fluoride Removal Cartridge


2 in stock


Activated Alumina Fluoride Removal Water Filter Cartridge

Fluoride cartridge filter (activated alumina). When removal of fluoride from your water supply is required this filter can be added to existing systems – the manufacturer states a minimum 90% removal. Independent tests performed at Tweed Heads, Qld, showed a 98% removal.


Capacity: Approximately 1900 Litres Fluoride Reduction

Flow Rate: 1.9 LPM

Activated Alumina can be blended with other absorbents such as carbon, clay minerals, molecular bonding agents and elastomeric polymer.
Mechanically strong and highly resistant to abrasion, breakage and deterioration during usage thereby insuring a long life service.
Activated Alumina is relatively inert, non-toxic, non-corrosive and not prone to oxidation
* Good performance, even at low concentration ranges

Activated Alumina is considered safe and non toxic and has been widely used and approved within the water filtration industry for many years. It is a recognized treatment media by the WQA (Water Quality Association).

You should expect to see close to 100% reduction of typical levels of fluoride found in water supplies with most legitimate manufacturers cartridges containing activated alumina as long as they are used within the manufacturers guidelines with regards to flow rates, temperature and replacement time frames. It is a proven medium for the removal of fluoride throughout many industries and applications and is acknowledged as an effective method by WQA (Water Quality Association).


activated alumina spec sheet



There are no reviews yet.

Be the first to review “Fluoride Removal Cartridge”

Your email address will not be published. Required fields are marked *